KATADYN PowerSurvivor 40 12 V. The easiest watermaker to install on a pleasure boat and the most energy-efficient, KATADYN Survivor 40 with a consumption of 4 A/h with a production of 5.6 liters of fresh water per hour.

The Power Survivor 40E contains 40% fewer parts than its predecessor, the 35!

No more installing a very expensive and energy-consuming desalinator, the Swiss manufacturer KATADYN offers here its smaller 12V or manual model Survivor 40, it is clearly aimed at pleasure sailboats and boats of less than 45'. Easy to install and maintain, this new generation desalinator is the low-cost solution for desalinating water on board your boat.

Advantage of the 12V KATADYN Survivor 40E/12 V watermaker for boats:
Easy installation
Very compact and lightweight
Reduced number of parts for easy maintenance
Lowest power consumption
Manual use possible
Affordable price for maximum performance
KATADYN manufacturing quality guaranteed for 3 years

Technical characteristics of the KATADYN Survivor 40 boat watermaker:
Technology: Reverse osmosis
Desalination: 98.4% on average (96% minimum). The desalination rate depends on various influencing factors such as water temperature and salinity.
Membrane approved by the US FDA
Certification: CE

Parts supplied with the KATADYN Survivor 40 12V Watermaker Kit:
PS 40 Reverse Osmosis Membrane
Pre-filter installation kit Filter housing & Replacement filter - Pentair R30
Handle for manual operation
Instructions in French
Grease - Grizzly, 25g tube Bio 1-1000
Kit of 2 3-way valves (sea water & fresh water)
Seawater & Freshwater Hose Kit
Fittings & Clamps Kit
Preservative, 100g

Delivery method ONLY Express in France and Europe

Pre-filter kit: For waters with a high content of suspended particles, for example when anchoring in a bay with shallow water, it is advisable to use an additional pre-filter. This additional filter is finer (5 microns. 1 micron = 0.001 mm) than the standard pre-filter (30 microns) and is placed after it.

A water feed pump (12 V/ 0.8 Ah) is also integrated. This pump compensates for losses caused by the second pre-filter and increases water production. The use of the pre-filter kit is also recommended when the PowerSurvivor is installed above the waterline and in the case of regular use, in order to increase maintenance intervals.