Dessalator D100 DUO AC/DC 12 / 230V watermaker 100 litres/hour model. Modular version with remote control panel For motor boats and sailboats from 10 to 15 meters
Modular version with remote control panel For motorboats and sailboats from 10 to 15 meters The first dual-energy watermaker system in the world A single inverter allows the motor to be started at 12V or 24V and at 120V or 230V The Duo is a clever and patented system.

The entire Dessalator range is now assembled on a stainless steel frame, V-folding. These supports have received a poly-gloss electrolytic treatment and are even more resistant. It also led to weight gain

Thanks to this system, the motors engage independently of each other, without electric clutch or manual intervention on the pulleys. Reliable and 100% safe, like all Dessalator products. For more than ten years, the DUO 60 and 100 have been fitted in series by major shipyards and are the essential choice of sailors. The advantage of the Duo is the "2 in 1", as if you had two watermakers, with the possibility of optimal and logical operation.

For example: when there is no wind and the motor is running, there is 12V or 24V at will. Here, direct current operation is interesting (DUO 60: 370 W, DUO 100: 600 W). At anchor or when the generator is running, the watermaker is used at 230V.

Its low consumption (DUO 60: 5A, DUO 100: 6.5A) allows the full power of the charger to be retained for recharging the batteries and for other uses (eg hot water tank).

In standard assembly, only the hull valve with strainer is delivered. The other valves can be supplied on request because most of the time the discharges are connected to existing discharges and the fresh water departures often have shut-off valves.

DESSALATOR products are delivered complete, the equipment complies with the EEC standards in force

The strainer and the hull valve The automated rinsing solenoid valve The pre-filter for 5 micron solid particles and its assembly key, fitted with a 3-way manual rinsing valve Circuit breaker or fuse holder depending on the model. High pressure piping: 2 tubes and 4 special DESSALATOR® fittings. Diaphragm/Panel Freshwater Production Piping.